Okay, so i have a custom built image using the previous angstrom release (2014-xx) , that was running on kernel 3.8 and had no issue with the DTS or anything.
IT was actually quite straightforward to use, just adding a line in uEnv and the UART loaded. Now, with the new Kernel 4, i'm not even getting that BB-UART1.dts file in the image !. I made a custom recipe with a bbappend for the kernel, adding and building the BB-UART1.dts to a .dtb I copied it to the new image under /lib/firmware/BB-UART1.dtbo Now, on boot i'm seeing [ 3.697910] bone_capemgr bone_capemgr: slot #1: No cape found [ 3.757905] bone_capemgr bone_capemgr: slot #2: No cape found [ 3.817898] bone_capemgr bone_capemgr: slot #3: No cape found [ 3.823686] bone_capemgr bone_capemgr: enabled_partno PARTNO 'BB-UART1' VER 'N/A' PR '0' [ 3.823699] bone_capemgr bone_capemgr: slot #4: override [ 3.823715] bone_capemgr bone_capemgr: Using override eeprom data at slot 4 [ 3.823731] bone_capemgr bone_capemgr: slot #4: 'Override Board Name,00A0,Override Manuf,BB-UART1' [ 3.823849] bone_capemgr bone_capemgr: enabled_partno PARTNO 'BB-UART2' VER 'N/A' PR '0' [ 3.823862] bone_capemgr bone_capemgr: slot #5: override [ 3.823873] bone_capemgr bone_capemgr: Using override eeprom data at slot 5 [ 3.823888] bone_capemgr bone_capemgr: slot #5: 'Override Board Name,00A0,Override Manuf,BB-UART2' [ 3.824374] bone_capemgr bone_capemgr: initialized OK. but no sign of /dev/ttyO1 like in previous kernel. i'm not seeing the HDMI "cape" like in previous kernel. cat /sys/devices/platform/bone_capemgr/slots 0: PF---- -1 1: PF---- -1 2: PF---- -1 3: PF---- -1 4: P-O-L- 1 Override Board Name,00A0,Override Manuf,BB-UART1 5: P-O-L- 0 Override Board Name,00A0,Override Manuf,BB-UART2 I must be missing SOMETHING, ANY help would be greatly appreciated. I'll post a full working solution once this is up ! -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
