scenario: next week, i'm teaching an embedded linux course using the
beaglebone black as a test vehicle, so i'm trying to enumerate all the
possible S/W tools i might use for that class, just for the sake of
variety.
for the sake of cross-compiling u-boot, the kernel and the rootfs,
what are the best choices in ARM toolchain that people would
recommend?
for now, i'm going to have the following available:
* based on robert nelson's eewiki.net page, i'll have linaro's
gcc-linaro-arm-linux-gnueabihf-4.9-2014.09_linux.tar.xz
* i'll also have linaro's much newer
gcc-linaro-5.1-2015.08-x86_64_arm-linux-gnueabihf.tar.xz, which i
admit i haven't tested as much
* finally, i'll have the toolchain built by the yocto project:
poky-glibc-x86_64-meta-toolchain-cortexa8hf-vfp-neon-toolchain-2.0.sh
that should be more than enough, but is there anything else i can
throw into the mix, just for completeness?
rday
--
========================================================================
Robert P. J. Day Ottawa, Ontario, CANADA
http://crashcourse.ca
Twitter: http://twitter.com/rpjday
LinkedIn: http://ca.linkedin.com/in/rpjday
========================================================================
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
