> On Nov 9, 2015, at 7:38 PM, Jaron Horst <[email protected]> wrote: > > I'm converting from Raspberry Pi to BBB and am trying to get the GPIO to > work. One thing I noticed is that Adafruit Pull-up resistor command in their > Python GPIO package only seams to work on certain GPIO's. Ex: I could get it > to work on P8_7 to P8_10 but not P8_11 to P8_14. Where can I find > documentation on what GPIO's support pull up/down resistors and which do not? > (that is, assuming I didn't just stumble on a bug in the Adafruit GPIO > library!) Thanks! > > import Adafruit_BBIO.GPIO as GPIO > GPIO.setup("PA_7", GPIO.IN, pull_up_down = GPIO.PUD_UP) My bet is you haven’t disabled the LCD in the device tree.
Regards, John > > -- > For more options, visit http://beagleboard.org/discuss > <http://beagleboard.org/discuss> > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected] > <mailto:[email protected]>. > For more options, visit https://groups.google.com/d/optout > <https://groups.google.com/d/optout>. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
