Hello, I have have worked with PLC's in the past (AutomationDirect,
Omron, Allen Bradley and IDEC) but I am not aware of anything that
would replace the PLC mfg. protocol that allows programming in ladder
logic other tool the sold.
I do recall (some years back) I could generate code in MS QuickBasic
that could interface to a SYSMAC Omron PLC.
There is the protocol referred to as MODBUS that sllow connecting
to/from PLC equipment and you may want to research that.
But, this does not generate the actual code which is usually ladder
logic or some form of that. The MODBUS can be used to access the PLC
registers, timers, I/O and such as that. Using MODBUS implemented on the
BBB or like micro equipment would then be using the PLC
assets directly.
Not usre if this is any help.
On 11/16/2015 10:25 AM, [email protected] wrote:
Hello:
I need connect Beaglebone (black or other) with a PLC Siemens. I have
seen that Texas Instruments have boards to connect beaglebone with
PLC, but I have found nothing more.
Could somebody tell me something?
Some example? Some web?
Thank you
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google
Groups "BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send
an email to [email protected]
<mailto:[email protected]>.
For more options, visit https://groups.google.com/d/optout.
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups "BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
