I found may mistake if one can talk of mistake : the serial line baud rate is 115200 and I was I was using it at 9600 So at best I saw gibberish
Lost two precious days On Wednesday, November 18, 2015 at 1:41:47 PM UTC+1, Axel Munt wrote: > > Hello > Fedora 20 > I have downloaded latest version of Buidroot 2015.08.01 and generated boot > files and root image like so > > $ make beaglebone_defconfig // BeagleBlak options defined , in > particular target > $ make menuconfig // Edit a few options (added C++) > $ make > > Got the expected tree > output/images/ > ├── am335x-boneblack.dtb > ├── am335x-bone.dtb > ├── MLO > ├── rootfs.ext2 > ├── u-boot.img > ├── uEnv.txt > └── zImage > > Partitioned 8Gb SDcard > - partition 1 : W95 FAT32 bootable (~78 MB > - partition 2 : Linux (remaining space ~ 7 GB) > > I then boot by maintaining boot button (S2) pressed while powering up > Beaglebone > Leds start flashing, some gibberish (2/3 lines) appears on serial line, > and I cannot access the BeagleBoard > > Can anyone help > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
