Ok, the command should be "ifup", but you probably want to run *ifconfig wlan0 *to find out that interfaces address information. For wireless configuration though, your image is probably running connman, other another connection manager to bring the wlanX interface up.
On Thu, Nov 19, 2015 at 8:00 PM, <[email protected]> wrote: > I'm new to using the BeagleBone Black and using linux programs in general > so I have installed Debian on the BeagleBone Black and setup a wifi adapter > so that the BBB is connected to the internet. When running the upif wlan0 > command, I found that it was bound to an ip address of XX.XX.XX.XX. I guess > this is the public ip address? My question is how do I ssh into the BBB > from my computer wirelessly or connect from a browser with this ip address? > In the /etc/network/interfaces, I have > > iface usb0 inet static > > address 192.168.7.2 > > netmask 255.255.255.0 > > network 192.168.7.0 > > gateway 192.168.7.1 > > > for static ip settings. Let me know if you need any more information. > > > Thanks. > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
