Thanks Robert, really appreciate that and did’t see dtb-rebuilder before.
I will give that a go. Just applied and rebooting. Can I remove the loading of the cape BB-UART2 as a result of this and will the port change from ttyO2 to ttyS2? Also is there a way to verify it’s in PIO mode now as well. Finally, if I do get the lockup, is there any info I can get you at all!! Lee On Tue, Nov 24, 2015 at 4:31 PM, Robert Nelson <[email protected]> wrote: > On Tue, Nov 24, 2015 at 10:21 AM, Lee Armstrong <[email protected]> wrote: >> I can certainly give that a go, I can replicate the problem every few hours. >> >> I am using simply loading the default overlay. >> https://github.com/beagleboard/bb.org-overlays/blob/master/src/arm/BB-UART2-00A0.dts >> >> What changes would I make to this? I am happy being able to compile that >> back into the initram etc. > Here you go: > https://github.com/RobertCNelson/dtb-rebuilder/commit/c7ef581450aa068b8cd6c428655a797f387562d1 > git clone https://github.com/RobertCNelson/dtb-rebuilder/ > cd dtb-rebuilder/ > git checkout origin/4.1-ti -b tmp > make > sudo make install > /boot/uEnv.txt > dtb=am335x-boneblack-ttyS2.dtb > about dtb-rebuilder: > it's regular synced with the 4.1.x-ti: > https://github.com/RobertCNelson/dtb-rebuilder/commits/4.1-ti > r31-r33 was just aufs/config changes so the dtb's are 100% binary.. > Regards, > -- > Robert Nelson > https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
