I have beaglebone black element14 board. My board is booting perfectly fine from eMMC. I want to boot it via SD CARD so downloaded the uboot fron denx site, compiled and generated the *MLO* and *uboot* image file.Followed the procedure of portioning the SD CARD into fat32 and ext4 and copied the the MLO and *u-boot.img* file using the *cp* command to the fat32 partition.
I followed the prescribed mechanism of pressing the S2 push button before applying the power(*I am only using USB for purpose of power and no external power*). But after connecting the USB , the boards power LED glows but nothing appears on the console. The console cable is working as when i was booting from eMMC, i used to get debug messages on the console. I read somewhere that i need to change the MLO file name in the eMMC.I did and now it is neither booting from eMMC nor from the SD card. Request help please. I -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
