Hi guys, I am pretty new using a BBB, and I am trying to use it with two network interfaces, one, wlan0 to get internet through usb wifi dongle, two a local connection via eth0 to another network.
I configured the /etc/network/interfaces wlan0 as a inet with dhcp, eth0 with inet.. static, an every works fine, because of I ping to the local network and it gaves me a anwer, I ping google and I have internet. Since booting I start with my networks fine, but The REAL PROBLEM is after a few seconds, when the BBB put eth0 as a default interface, so my internet is down (wlan0) , so I lose every contact with the world. I try to do ifdown, ifup, but the internet is gone, only when I unpluged the RJ45 (eth0), I get internet again. BUT I want to work with the two networks at the same time. How I set up forever my wlan0 as a default connection (interface), because I use IFMETRIC, so in my file /etc/network/interfaces I use metric 1 (wlan0), metric 10 (eth0), but the BBB does not care any metric. with route -n the system mounts a iface with eth0 and metric 0 , and the other parameters on Zero, too. Any help?? thanks -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
