$ dmesg | tail On Mon, Dec 7, 2015 at 8:36 AM, Bill Dussault <[email protected]> wrote:
> How do I get into the logfile? I did not know about that > Thanks > > > On Sunday, December 6, 2015 at 7:29:06 PM UTC-6, Bill Dussault wrote: >> >> Greetings, >> >> I am trying to install X11VNC and log into it via my laptop and I am >> having some tough luck >> >> Here is what I have done.......... >> >> I have changed my IP address to a 192.168.1.XX >> My router for some reason still thinks it is the old IP address even when >> I refresh it. >> >> I have turned on VNC on the firewall on my 2wire router >> >> Next I installed VNC: >> >> - Debian: sudo apt-get install x11vnc >> >> 3. Enter the below command >> >> >> >> -Debian: >> >> x11vnc -bg -o %HOME/.x11vnc.log.%VNCDISPLAY -auth >> /var/run/lightdm/root/:0 -forever >> >> >> (I'm not sure if I turned it on) >> >> >> I can ping the beaglebone from my computer >> >> >> C:\Users\William>ping 192.168.1.XX >> >> >> Pinging 192.168.1.XX with 32 bytes of data: >> >> Reply from 192.168.1.XX: bytes=32 time=3ms TTL=64 >> >> Reply from 192.168.1.XX: bytes=32 time=3ms TTL=64 >> >> Reply from 192.168.1.XX: bytes=32 time=5ms TTL=64 >> >> Reply from 192.168.1.XX: bytes=32 time=3ms TTL=64 >> >> >> Ping statistics for 192.168.1.XX: >> >> Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), >> >> Approximate round trip times in milli-seconds: >> >> Minimum = 3ms, Maximum = 5ms, Average = 3ms >> >> >> So I can See it. >> >> >> I start tightVNC on my laptop >> >> >> 192.168.1.XX:5901 >> >> >> I get connection has been gracefully closed. Or Connection >> was actively Refused... >> >> >> X11VNC has a few configurations when opened on the desktop I am >> unfamiliar with. No passwords in use as of yet (I was warned when I started) >> >> >> Does anyone see anything out of whack? >> >> >> Thanks! >> >> >> Bill >> >> >> -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
