Have you tried the Kamikaze image that is setup for the Replicape? http://wiki.thing-printer.com/index.php?title=Kamikaze
On Monday, December 14, 2015 at 10:49:53 AM UTC-5, RobertCNelson wrote: > On Mon, Dec 14, 2015 at 9:42 AM, hllpc <[email protected] > <javascript:>> wrote: > > I placed the .o file renamed as am335-pru1-fw but dmesg still gives me > the > > same warning.. and I get the same I/O error when trying to load > BB-REPLICAP, > > but it seems like cape-universaln is loaded at boot but is not in cat > > /boot/uenv.txt,if I try to remove it the beaglebone reboots > > YOu have an extra space: bone_capemgr.enable_partno= BB-REPLICAP > > [ 0.000000] Kernel command line: console=tty0 > console=ttyO0,115200n8 bone_capemgr.enable_partno= BB-REPLICAP$ > root=/dev/mmcblk0p2 rootfstype=ext4 rootwait coherent_pool=1M quiet > cape_universal=enable > > get rid of it.. > > Remove "cape_universal=enable" from /boot/uEnv.txt and you won't > > btw, replicape was setup to use uio-pruss, so change from the ti kernel > to: > > sudo apt-get update ; sudo apt-get install linux-image-4.1.14-bone17 ; > sudo reboot > > till it's upgrade for remoteproc_prus.. > > Regards, > > -- > Robert Nelson > https://rcn-ee.com/ > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
