Great ! Thanks Robert for this fast reply. Should I suggest that you modify the comment on uEnv.txt == #In the event of edid real failures, *or if installed on a BeagleBone Green,* uncomment this next line
Question: I am planning to install Mirko's BBB-Mini Cape. According to BBB-overlay ; BB-BBBMINI-00A0.dts -- dtbos: add ti,beaglebone-green it is already compatible ? Will I be able to use the onboard BB-UART2 with this Cape installed (considering that the BBB-MINI is using USB4 & 5 only) ? Best Regards Le mercredi 16 décembre 2015 09:45:50 UTC-5, RobertCNelson a écrit : > > On Wed, Dec 16, 2015 at 8:42 AM, Patrick Poirier > <[email protected] <javascript:>> wrote: > > Hello , > > > > I just downloaded bone-debian-8.2-test on my new BBGreen, I disable the > emmc > > on the uEnv.txt and when I try to load manuallu the UART2 > > sudo sh -c "echo 'BB-UART2' > /sys/devices/platform/bone_capemgr/slots" > > > > It end up with: > > > > [ 1156.746283] bone_capemgr bone_capemgr: slot #6: BB-UART2 conflict > P9.21 > > (#4:univ-all) > > [ 1156.754681] bone_capemgr bone_capemgr: slot #6: Failed verification > > sh: echo: I/O error > > the cape-universal overlay: "univ-all" is already loaded.. To > disable this, open: > > /boot/uEnv.txt > > and remove: > > cape_universal=enable > > Regards, > > -- > Robert Nelson > https://rcn-ee.com/ > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
