On Wednesday, December 9, 2015 at 8:19:06 PM UTC-7, Dean Bate wrote: > > Thanks for the reply. In the link that you sent me > http://elinux.org/Beagleboard:BeagleBoneBlack_Debian#2015-11-03 Is the > procedure as listed in section 3.2 (i.e.flash the eMMC) all that is > required to update my BB image or is there more to it ? I am very new at > this and I am trying to decipher all that is relevant in getting the > following command to work ... > > $ sudo sh -c "echo BB-SPIDEV1 > $SLOTS > > Regards, > > Dean > > On Wed, Dec 9, 2015 at 3:04 PM, Robert Nelson <[email protected]> > wrote: > >> > >> > I am using Ubuntu 15.04 and the BB Debian image on my BBB is >> 2014-04-23. I >> > have been trying for some days now to disable my HDMI and HDMIN >> overlays so >> >> It would have been faster to first upgrade to "2015-11-03 >> >> http://elinux.org/Beagleboard:BeagleBoneBlack_Debian#2015-11-03 >> >> > that I can access my BB-SPIDEV1 with limited success. One command in >> > particular (i.e. optargs=quiet >> > capemgr.disable_partno=BB-BONELT-HDMI,BB-BONELT-HDMIN) does indeed >> disable >> > HDMI yet with that said it will not allow me to enable SPIDEV1. I have >> > boldface highlighted the commands that were used as well as the o/p for >> > presentation purposes. Any insight into resolving this problem would be >> > helpful and much appreciated. Further note: I also tried >> > optargs=capemgr.disable_partno=BB-BONELT-HDMI and all to no avail. >> >> optargs=capemgr.disable_partno=BB-BONELT-HDMI,BB-BONELT-HDMIN >> optargs=capemgr.enable_partno=BB-SPIDEV1 >> >> Then that would have worked out of the box.. >> >> Regards, >> >> -- >> Robert Nelson >> https://rcn-ee.com/ >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to a topic in the >> Google Groups "BeagleBoard" group. >> To unsubscribe from this topic, visit >> https://groups.google.com/d/topic/beagleboard/FsKmr7hUksg/unsubscribe. >> To unsubscribe from this group and all its topics, send an email to >> [email protected]. >> For more options, visit https://groups.google.com/d/optout. >> > > For those that might benefit from my findings. Initially I could not flash the BBB. Why ? The driver for my card reader is not supported under Linux. I have yet to determine if I will now be able to disable the HDMI with this latest image
-- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
