On Tue, Jan 5, 2016 at 12:05 PM, Ray Madigan <[email protected]> wrote: > I have two Rev B beaglebone blacks. One I never used since I bought it. I > recently ordered a Rev C to use for my project but I thought I might as well > try to make some use the one I have never used. I wanted to put Debian 7.5 > on the device so it would be similar to the one I will get in a couple of > days. > > I first booted the device with the factory installed Angstrom distribution. > It worked well. > I then downloaded the image from http://beagleboard.org/latest-images > > I downloaded > > Older Debian images > BeagleBone Black (eMMC flasher) > Debian 7.5 (BeagleBone Black - 2GB eMMC) 2014-05-14 - more info - bittorrent > - md5: 74615fb680af8f252c034d3807c9b4ae > > > > I put the image on a microSd card, held the boot button down until it > started to echo info to the display > > It booted and the screen showed in red letters that it was a temporary > installation and I needed to flash to the eMMC. I used the terminal program > and it seemed to work. I didn't have time to flash it so I shut it down.
You shutdown mid flash... So it never completed the eMMC install, so yeah, you have to reflash now... Here is the latest "stable" 7.x-wheezy/3.8 kernel/2GB: http://elinux.org/Beagleboard:BeagleBoneBlack_Debian#BBB.2FBBG_.28All_Revs.29_eMMC_Flashers btw, we nuked this method, now you users don't get a temp session to play around anymore, everyone has to wait and watch the flashing process ;) > A couple of hours later I went back to try it again and it would not boot > the original Angstrom, the blue led's all stay on and nothing happens. If I > try to load the Debian image I get 3 lines on the display that I will post > next. > > [25.132791] libphy: PHY 4a101000.mdio:01 not found > [25.137954] net etho: phy 4a101000.mdio.01 not found on slave 1 > [28.305991] tilcdc 4830e000.fb: timeout waiting framedone > > Then it waits a period and seems go go to neverlnd. The display responds > that it has lost its signal. > > Any help would be useful. > > Useful responses might be something like: > > Sorry dude, your device is now bricked. > or > Maybe you can get better response here > or > Advice on how to reset the device or something. Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
