Hi I have tried every possible tutorial that I could find on the net to setup and compile QT5 for Target and host. I am using the BeagleBone Black and I can generate an image in several ways. At the moment I have an Ubuntu 14.04 with a 4.1.x kernel installed. I also have the QT stuff compiled and installed on the image. I also have a Debian image with the same. This I done with the Yocto project. So the problem is not to build an image but rather the tool chains and the QT environment on the PC side
I accept that it is always of my own fault that things dont compile and work out, so I dont blame anyone for the failures. I have spent more than a month trying all kinds of recipes and tutorials but none seem to explain in layman's terms what is required. They explain the steps but I dont have a clear understanding of what is needed to do for the target and what for the host and then how to apply these in the Qt creator environment. There is always a failure of sorts and then you are left in the dark with no one to ask. My host PC is running Debian 8 (Jessie). Can anyone recommend a link to a tutorial will help me setup QT5 with Qt creator and the PC and how to get the debug on the target going. Not the QT documentation please, it is not written to help anyone. Any help will be appreciated. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
