I'm not much of a Mac user, but I have similar issues on Linux with both BBB and BBG. The usb "gadget" startup seems "flaky". What usually works for me if the usb gadget doesn't start on boot: I press and hold the powerbutton on the board and force a powerdown. Then I press it again to do a cold start. This usually works, but some times requires multiple cycles.
I'm assuming that the MSDOS partition mounts on your Mac as a usb "thumbdrive" would, (otherwise how did you install the drivers?). If not, I suspect something is wrong with the driver installation. Have you rebooted you Mac after installing the drivers? On Thursday, January 7, 2016 at 7:26:00 PM UTC-6, [email protected] wrote: > > Hi, > > I just got the Beagle Bone Green Kit ( > http://www.amazon.com/gp/product/B0168L6B0C) and trying to connect it to > my MacBook (10.11.2). I already installed FTDI (EnergiaFTDIDrivers2.2.18) > and RNDIS Drivers (HoRNDIS), however I still see that the board is > disconnected in the Network panel. Attaching the screenshot for the same. > Can anyone guide me on what am I missing here? > > Thanks. > > > <https://lh3.googleusercontent.com/-5-1sCfTx-G8/Vo77AnAqEDI/AAAAAAAAChU/acSVzaIkhNw/s1600/Network.png> > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
