On Sun, Jan 10, 2016 at 11:30 PM, Robert Nelson <[email protected]> wrote: > > On Jan 10, 2016 8:50 AM, "darklight wu" <[email protected]> wrote: >> >> Hi, All, >> >> I found the BBB-blank-eMMC-flasher uses bbb-blank-eeprom.conf and >> configures the boards as "am335x-boneblack". But the BBB-eMMC-flasher >> uses beaglebone.conf and configures the board as "am335x_evm". >> >> I suppose the BBB should select "am335x-boneblack" as board type so >> the image should be BBB-blank-eMMC-flasher-xxx.img.xz. But I found BBB >> WiKi >> (http://elinux.org/Beagleboard:BeagleBoneBlack_Debian#BBB_Rev_C.2FBBG_.284GB_eMMC.29) >> suggests BBB-eMMC-flasher-xxx.img.xz. >> >> So what is the difference? > > The blank is for oem's on first bootup eeprom programing.. Ok. So per my understanding, the "am335x_evm" is being used as the board model for BBB-eMMC-flasher, right? I thought we should use "am335x-boneblack". Anything I misunderstood in the image-builder code?
Thanks! > > Regards, -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
