On Fri, Jan 15, 2016 at 8:53 AM, Stéphane Massot <[email protected]> wrote:
> Hello, > > I have been working on a BBB from the 2015-11-12 image (debian 8.1). > use weekly snapshots from: http://elinux.org/Beagleboard:BeagleBoneBlack_Debian#Debian_Image_Testing_Snapshots That 8.1 image has known issues.. > > It works well, so I tried to use the image in our older beaglebone (BBW) > products, since it is supposed to be compatible. > Works fine here.. > > However it doesn't boot ! I've tried again with the vanilla image (the > same image but without my custom modifications), and it doesn't boot either. > In fact, it starts the boot operation, and after 1min30, prints some > errors related to the cape manager, and then all the board's lights go off > (even the ethternet LEDs), and it goes radio-silent. > > You will find attached my complete boot log from the console output on > USB. At first glance, what strikes me is : > debug: [/boot/dtbs/4.1.12-ti-r29/am335x-boneblack-emmc-overlay.dtb] ... Why did you do that? The White is not the Black... The White doesn't need the special "overlay.dtb"... Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
