On Sun, Jan 31, 2016 at 9:11 PM, Caveman <dirmwt...@gmail.com> wrote: > I attempted to post this question earlier but I don't believe the post > showed up. If it did I apologize for the duplicate post. > > I have a BBB running Debian jessie 8.2 and the linux kernel is > 4.1.12-ti-r29. > > I've connected a thumb joystick as follows > > vcc - P9_32 > gnd - P9_34 > hor - P9_36 > ver - P9_38 > > I did not connect the switch to anything because it isn't needed. > > > I've attempted to read the output of the joystick using information i found > online and have failed miserably. The numerous tutorials/instructions say > that you have to enable the analog inputs on the beagle bone. The > instructions for doing so involve using bone_cape. My BBB doesn't seem to > have bone_cape and further research seems to indicate that bone_cape is the > old way of doing things and isn't available for the kernel that i'm running. > > I have yet to find out how I would enable the analog inputs on my setup. If > some one knows of a resource that i've missed that will shed some light on > the subject I'd greatly appreciate it.
You should talk to caveman: https://groups.google.com/d/msg/beagleboard/qUvzhp2FhWM/fVbK5PrpAQAJ Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.