By the way, I would not recommend following that information for current up to date Debian images. I should probably write up an update for newer images . . .
On Fri, Feb 5, 2016 at 11:14 AM, William Hermans <[email protected]> wrote: > If the drive does not show up from the output of lsusb, then the hardware > isn't connecting to the OS. So, I would suggest bypassing the USB HUB for a > temporary test, and see if the drive shows up like that. > > 3.8.13-bone47 might be old, but I know it works with external self powered > USB hard drives. As I've booted from USB in the past . . . Note the date of > this blog post I wrote . . . over two years ago. > http://www.embeddedhobbyist.com/2013/07/beaglebone-black-usb-boot/ > > On Fri, Feb 5, 2016 at 10:34 AM, Robert Nelson <[email protected]> > wrote: > >> On Fri, Feb 5, 2016 at 11:31 AM, Rikk Sullenberger >> <[email protected]> wrote: >> > I am trying to attatch a 360gig USB2 NTFS hard drive to a Beaglebone >> Black. >> > The drive does not show up under the /dev/ tree, doesn't show up with >> lsusb, >> > doesn't show up in dmesg.. >> > >> > The drive is self powered, I have tried a different hub, different hard >> > drive, the hard drive works on a raspberry.. >> > >> > Anyone had this happen? I bought this BBB a year ago and just started >> > playing with it... >> >> > [ 17.647683] usb usb2: Manufacturer: Linux 3.8.13-bone47 musb-hcd >> > [ 17.647694] usb usb2: SerialNumber: musb-hdrc.0.auto >> > [ 17.648205] usb usb2: usb_probe_device >> > [ 17.648223] usb usb2: configuration #1 chosen from 1 choice >> > [ 17.648269] usb usb2: adding 2-0:1.0 (config #1, interface 0) >> > [ 17.648396] hub 2-0:1.0: usb_probe_interface >> > [ 17.648410] hub 2-0:1.0: usb_probe_interface - got id >> > [ 17.648428] hub 2-0:1.0: USB hub found >> > [ 17.648452] hub 2-0:1.0: 1 port detected >> > [ 17.648463] hub 2-0:1.0: standalone hub >> > [ 17.648473] hub 2-0:1.0: individual port power switching >> > [ 17.648483] hub 2-0:1.0: no over-current protection >> > [ 17.648493] hub 2-0:1.0: Single TT >> > [ 17.648505] hub 2-0:1.0: TT requires at most 8 FS bit times (666 ns) >> > [ 17.648516] hub 2-0:1.0: power on to power good time: 10ms >> > [ 17.648540] hub 2-0:1.0: local power source is good >> > [ 17.648599] hub 2-0:1.0: enabling power on all ports >> > [ 17.748539] hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0000 >> > [ 17.748600] hub 2-0:1.0: hub_suspend >> > [ 17.748629] usb usb2: bus auto-suspend, wakeup 1 >> >> >> 3.8.13-bone47 is pretty old.. How are you powering the bbb? 5volt dc >> jack right???? >> >> Give one of the jessie lxqt shapshots a try with a more modern kernel: >> >> >> http://elinux.org/Beagleboard:BeagleBoneBlack_Debian#Debian_Image_Testing_Snapshots >> >> Regards, >> >> -- >> Robert Nelson >> https://rcn-ee.com/ >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> For more options, visit https://groups.google.com/d/optout. >> > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
