http://processors.wiki.ti.com/index.php/PRU_Training:_Hands-on_Labs <http://processors.wiki.ti.com/index.php/PRU_Training:_Hands-on_Labs>https://git.ti.com/pru-software-support-package/pru-software-support-package/ <https://git.ti.com/pru-software-support-package/pru-software-support-package/>
Regards, John > On Feb 17, 2016, at 4:31 AM, [email protected] wrote: > > Hi everybody, > > After some test by using python or bonescript, it seems that i'm not able to > measure the frequency of a square waveform faster than 150Hz. > > So, i decided to work with PMU. > > As i'm easy to work with Microchip microcontroller, i thought it will be easy > to work with PMU for this little exercice. > > The problem is that i find some information that used Assembly code, but > example are old. > > What are the up to date tool to use to start with PRU C developpement. > > Is there a clear tutorial on which tool to install and step to follow to make > the first programm using PMU? > > I also tested by using Cloud9 but i dont't have the PRU Exmple like on the > videi in the PRU section of the BBB website. > > Thanks a lot for your help cause i'm little bit stuck before any typing code > :D > > > > -- > For more options, visit http://beagleboard.org/discuss > <http://beagleboard.org/discuss> > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected] > <mailto:[email protected]>. > For more options, visit https://groups.google.com/d/optout > <https://groups.google.com/d/optout>. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
