> /etc/systemd/system/sockets.target.wants/node-red.socket to > /lib/systemd/system/node-red.socket. > bb-node-red-installer:Installed > > > I rebooted and all seems well, Presumably I next need to do : > npm install i18next > although I'm not sure what the "from version 2.0.0" is trying to tell me.
That message isn't for you... It's for the npm maintainer of "node-red"... I haven't found a good way to keep npm shut up yet, still show some progress.. > Cloning my 8GB SD card went a lot faster doing these upgrades, which brings > up the question: > Can I make an SD card of the latest "Jessie testing" image on one BB, say a > BBB install and setup my "extras" and then clone it and boot it on a > different BB, say a BBG? That works fine, i do it in the lab here all the time with the Black/Green.. > I've BBW,BBB, & BBG, in other words, is there any "first boot" code in the > images that change things based on what system its booted on initially? u-boot can correctly detect the board... Just don't force a "white" *.dtb on a black, as you'll burn out hdmi.. > I initially got my first BBG to be a hardware backup in case a hardware > interface blunder killed my BBW, once the initial run able version of my > application was working, I cloned the SD card, edited /boot/uEnv.txt to > disable eMMC and booted it on the BBG. My application appeared to run (uses > essentially all the GPIO on P8), without the external hardware connected I > couldn't be 100% sure. but all the /sys/class/gpio/gpio* matched the P8 ones > from the BBW Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
