On Sunday, September 28, 2014 at 6:44:24 PM UTC+3:30, Andrew Henderson wrote: > > Hello all. I have released a new port of Android for the BBB. This > version uses AOSP 4.4.4 (KitKat) and the 3.8 Linux kernel. I have made > build instructions and a pre-made image available at > http://www.bbbandroid.org. I use a combination of AOSP repos and Rowboat > build scripts, and I have a few custom repos for the kernel, bootloader, > and additional "external" tools (such as i2c-tools). You can view the repo > manifest XML file for the project here: > > > https://github.com/hendersa/bbbandroid-manifest/blob/master/bbbandroid-aosp-4.4.4_r1-3.8.xml > > Because this Android image uses the 3.8 kernel, you should be able to just > plug in your capes and go without any hassle: > > Built-in HDMI cape: > http://i.imgur.com/q4AZQ95.jpg > > 4D Systems LCD capes: > 4DCAPE-43T: http://i.imgur.com/6qHmgqX.jpg > 4DCAPE-70T: http://i.imgur.com/UZLG7Or.jpg > > CircuitCo LCD capes: > LCD3: http://i.imgur.com/LC7SrBB.jpg > LCD4: http://i.imgur.com/1xBQ8R6.jpg > LCD7: http://i.imgur.com/vxoqROE.jpg > > Andrew >
Hi Andrew. Thanks a lot for your great work. I'm trying to flash BBBAndroid to eMMC but using fastboot. the problem is it does not boot with kernel 3.8, just boots with kernel 3.2. I'm using the u-boot with fastboot support "U-Boot SPL 2013.01.01-bbb-fb-00002-gf7d94e6 ". It complains about not supported machin ID. Any suggestion? -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
