I'd probably go for something like an NXP LPC1114 if interfacing an external MCU to do offload / offboard type stuff. The reasoning is pretty simple. These MCU's IIRC only need a resistor, and a capacitor to get up and running. Based on other preferences, I'd actually prefer something like an MSP430G2552* because they're easy to use, and I'm fairly familiar with them already. the NXP MCU's I've actually not touched yet, but have done a lot of reading on them( in the past ).
On Sun, Apr 3, 2016 at 9:48 AM, Dennis Lee Bieber <[email protected]> wrote: > On Sun, 3 Apr 2016 08:43:10 -0700, John Syne > <[email protected]> declaimed the following: > > >In that case, then you have no choice; PRU is your only solution on the > BBB. > > > Which I'll have to leave to the OP -- I'm more likely to dig up an > Arduino with DHT library to confirm my DHT11 is working (it was one of some > 37 or so little boards with headers for breadboarding - > > http://www.amazon.com/SunFounder-modules-Arduino-Mega2560-controller/dp/B00CBDUD60 > [though that has been updated, keypad and color manual it looks like, I > just had the sensors and poorly translated guide book] before trying to > figure out the build environment for the PRUs [After the Arduino I may try > the TIVA -- time I do something more than half the TI-RTOS training guide]) > > -- > Wulfraed Dennis Lee Bieber AF6VN > [email protected] HTTP://wlfraed.home.netcom.com/ > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
