@Robert I'm not sure why, but I've never had to follow those instructions to get g_ether working. Perhaps it's because I'm actually using g_ether, and not g_multi ?
On Sun, Apr 3, 2016 at 4:50 PM, William Hermans <[email protected]> wrote: > *I added it already, but with full path. Without the path it works, at >> least partially. With ifconfig i can find usb0 now. But without a >> IP-address:* >> > > Yeah, you do not add the path, and I do not think you want to add the file > extension ( .ko ) either. It's like using modeprobe, it only expects the > module name, and does not want the extension or path. > > > On Sun, Apr 3, 2016 at 4:36 PM, Robert Nelson <[email protected]> > wrote: > >> On Sun, Apr 3, 2016 at 6:33 PM, 'Juergen' via BeagleBoard >> <[email protected]> wrote: >> > Thanks, William! >> > >> >> … i've added >> >> "/lib/modules/3.8.13-bone63/kernel/drivers/usb/gadget/g_ether.ko" to >> >> "/etc/modules" >> >> >> > I added it already, but with full path. Without the path it works, at >> least >> > partially. With ifconfig i can find usb0 now. But without a IP-address: >> > >> > usb0 Link encap:Ethernet HWaddr 16:74:59:af:75:91 >> > BROADCAST MULTICAST MTU:1500 Metric:1 >> > RX packets:0 errors:0 dropped:0 overruns:0 frame:0 >> > TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 >> > collisions:0 txqueuelen:1000 >> > RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) >> > >> > I have to use ifconfig usb0 192.168.7.2 to get this >> > >> > usb0 Link encap:Ethernet HWaddr 16:74:59:af:75:91 >> > inet addr:192.168.7.2 Bcast:192.168.7.255 Mask:255.255.255.0 >> > inet6 addr: fe80::1474:59ff:feaf:7591/64 Scope:Link >> > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 >> > RX packets:22 errors:0 dropped:0 overruns:0 frame:0 >> > TX packets:3 errors:0 dropped:0 overruns:0 carrier:0 >> > collisions:0 txqueuelen:1000 >> > RX bytes:1176 (1.1 KiB) TX bytes:370 (370.0 B) >> > >> > Is there anything else that I can do that it works as before? >> >> Follow these directions: >> >> >> https://eewiki.net/display/linuxonarm/BeagleBone+Black#BeagleBoneBlack-usbgadget >> >> They'll get you close to what the default did.. >> >> Regards, >> >> -- >> Robert Nelson >> https://rcn-ee.com/ >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> For more options, visit https://groups.google.com/d/optout. >> > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
