I'm running a BeagleBone Black with Debian, 3.8.13-bone63. DCAN1 is enabled.
Some (long) time ago I've disabled the Ethernet over USB0. Because I'm
fairly new in Linux, I can't remember how. To re-enable it I've uncomment
the corresponding settings in /etc/network/interfaces to
# Ethernet/RNDIS gadget (g_ether)
# ... or on host side, usbnet and random hwaddr
# Note on some boards, usb0 is automaticly setup with an init script
iface usb0 inet static
address 192.168.7.2
netmask 255.255.255.0
network 192.168.7.0
gateway 192.168.7.1
After rebooting and "ifconfig -a" there is no "usb0". After that i've added
"/lib/modules/3.8.13-bone63/kernel/drivers/usb/gadget/g_ether.ko" to
"/etc/modules"
After reboot there is again no "usb0". After "modprobe g_ether" and
"/etc/init.d/networking
restart", I can find "usb0" with "ifconfig".
How can I do it, that the Ethernet over usb0 will automatically load/starts
again during startup.
Thanks!
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
