'Flashed' a custom angstrom build from SD as i have done many times in the
past .... (tested the image from the SD a couple of times and was working
great)
upon reboot, i get this :
U-Boot SPL 2016.01 (Mar 25 2016 - 14:36:19)
Trying to boot from MMC
reading args
spl_load_image_fat_os: error reading image args, err - -1
reading u-boot.img
reading u-boot.img
U-Boot 2016.01 (Mar 25 2016 - 14:36:19 +0100)
Watchdog enabled
I2C: ready
DRAM: 512 MiB
NAND: 0 MiB
MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
*** Error - No Valid Environment Area found
*** Warning - bad CRC, using default environment
Net: <ethaddr> not set. Validating first E-fuse MAC
cpsw, usb_ether
=>
Won't boot from SD anymore, can't type anything ... if i try to start it
with the "boot" button down, i'm just getting "CCCCCCCCCCC".
If i can get it to boot from SD i can always try to fix things easily ...
How can i unbrick this ? :(
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
