Hi all, I'm trying to operate the Seeds Studio HDMI cape into the BeagleBone Green with last firmware. The LCD screen that I'm using is a 5" size and 800x480 resolution touch screen. I know that this resolution is not supported directly by the beaglebone but as I read is posible to configure beaglebone's out resolution manualy. But that's a problem that I will later. The screen works because if I connet it to the laptop I can see the laptop desktop there.
So with newly installed firmware the output of the "cat /sys/devices/platform/bone_capemgr/slots" command is 0: PF---- -1 1: PF---- -1 2: PF---- -1 3: P----- -1 Beaglebone green hdmi cape,00A0,Seeed,BB-GREEN-HDMI 4: P-O-L- 0 Override Board Name,00A0,Override Manuf,univ-emmc So with this, I can interpret this firmware brings support for this cape, but is not loaded for some reason... I try editing the /boot/uEnv.tx file adding "cape_enable=bone_capemgr.enable_partno=BB-GREEN-HDMI" line but it has not been effective. I found multiple threads with information to disable the hdmi in beaglebone, but nothing about how to activate the hdmi cape. SeedStudio gives you a firmware but is out of date and I want to try to configure it for the last firmaware. Can anyone give me some tip as to which way to go? -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
