1.) That package is not an "eMMC Flasher" unless you edit the uEnv.txt file as instructed at http://elinux.org/Beagleboard:BeagleBoneBlack_Debian#Flashing_eMMC
Did you do that? 2.) That file pretty much fills up a 4 G memory space. There may not be enough space to add much on the 4G eMMC or a 4G uSD card. 3.) Is there a reason that you would not want to buy a larger uSD card , like 16 G or 32 G or ... and run from that card ? 4.) If that is acceptable, then understand that the installation image only uses 4 G on a card, no matter how much larger the card is, until you follow the instructions to expand the file system to use the entire card, at http://elinux.org/Beagleboard:BeagleBoneBlack_Debian#Expanding_File_System_Partition_On_A_microSD If you buy a quality uSD card, the speed difference for running from a uSD card versus eMMC is negligible. --- Graham == On Tuesday, April 19, 2016 at 9:04:00 AM UTC-5, blues man wrote: > > I'm using this one from https://beagleboard.org/latest-images: > > Jessie for BeagleBone, BeagleBone Black, SeeedStudio BeagleBone Green, > element14 BeagleBone Black Industrial and Arrow BeagleBone Black Industrial > via microSD card > > - Debian 8.3 (BeagleBone, BeagleBone Black, SeeedStudio BeagleBone > Green, element14 BeagleBone Black Industrial, Arrow BeagleBone Black > Industrial - 4GB SD) 2016-01-24 > > <https://debian.beagleboard.org/images/bone-debian-8.3-lxqt-4gb-armhf-2016-01-24-4gb.img.xz> > > - more info > > <https://www.google.com/url?q=https%3A%2F%2Fbeagleboard.org%2Fproject%2Fdebian&sa=D&sntz=1&usg=AFQjCNEbIxnbEHBghPLDRsM-7jjnWErerw> > > - bmap > > <https://debian.beagleboard.org/images/bone-debian-8.3-lxqt-4gb-armhf-2016-01-24-4gb.bmap> > > - sha256sum: > da97d7794d834ee785265162635aedcca80fd6dc374593dd05473c0a25f0ac73 > > It installs and runs fine - I just can't then install JRiver Media Center, > apparently because of the "no more space on device" problem. > > D > > On Tuesday, April 19, 2016 at 9:47:00 AM UTC-4, RobertCNelson wrote: >> >> >> >> On Tue, Apr 19, 2016 at 8:41 AM, blues man <[email protected]> wrote: >> >>> That answers one big question - thanks! Then there must be something >>> wrong with my 'bone, because it's not removing everything now when I >>> reflash. I didn't have this problem through multiple installations and >>> reinstallations of JRiver and other similarly sized packages, so something >>> has changed. If I can't figure out what it is and fix it, I'll just have >>> to buy a new board to use as a JRiver zone. >>> >> >> There's a 99.99% change that nothing is wrong with your bone... >> >> The error is in what every 'image' you are using to 'reflash'.. Since >> you never specified what image you are using to reflash, i can't currently >> answer that.. >> >> Regards, >> >> -- >> Robert Nelson >> https://rcn-ee.com/ >> > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/2f688081-8c5b-4c7f-8eb5-330d9287ae2c%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
