So I downloaded and installed the Jessie IoT Snapshot. I like that it
doesn't have a bunch of stuff running I don't need.
I am trying to get the USB networking to work. It worked with the board
straight out of the box, so I know the problem is not on my laptop. After
flashing the IoT image I dicked around with connman enough to decide I
didn't like it, so I uninstalled it (and USB was unresponsive with that
too). That didn't help.
I do see the usb0 stanza in /etc/network/interfaces,
[ root@beaglebone:~ ]
0s 👍 #> more /etc/network/interfaces
[snip]
# Ethernet/RNDIS gadget (g_ether)
# Used by: /opt/scripts/boot/autoconfigure_usb0.sh
iface usb0 inet static
address 192.168.7.2
netmask 255.255.255.252
network 192.168.7.0
gateway 192.168.7.1
and I do see usb0 output in my ip addr output
[ root@beaglebone:~ ]
0s 💩 #> ip addr
[snip]
3: usb0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast
state DOWN group default qlen 1000 link/ether 68:9e:19:8f:60:f0 brd
ff:ff:ff:ff:ff:ff
inet 192.168.7.2/30 brd 192.168.7.3 scope global usb0
valid_lft forever preferred_lft forever
(of course I get that via eth0.)
Googling I see this
https://kwantam.github.io/BBKNotes1.html
which is out of date. it says to update /etc/inittab (among other things),
and that's gone in the new systemd world...
so how do I do this? How do I get USB networking to work with the Jessie
IoT image?
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/beagleboard/c5649e6e-5395-4b5c-a7f3-b74bc4963854%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
