On Wed, Apr 27, 2016 at 3:00 PM, Edwin Maynard <[email protected]> wrote:
> OK - status: > 1) Compile - Good > 2) flash new MLO and u-boot.img - Good > 3) to check who booted i changed the hostnames on the eMMC (GEMMX) and SD > cards (GEMM3) > 4) cycle power with SD inserted gives GEMMX (SD card) > 5) cycle power and remove SD card gives GEMM3 (eMMC) > > Here's a scrape from the am335x_evm.h file" > > #define BOOTENV_DEV_NAND(devtypeu, devtypel, instance) \ > "bootcmd_" #devtypel "=" \ > "run nandboot\0" > > #define BOOTENV_DEV_NAME_NAND(devtypeu, devtypel, instance) \ > #devtypel #instance " " > > #define BOOT_TARGET_DEVICES(func) \ > func(LEGACY_MMC, legacy_mmc, 0) \ > ^ this is also microSD.. > func(MMC, mmc, 1) \ > func(LEGACY_MMC, legacy_mmc, 1) \ > func(NAND, nand, 0) \ > func(PXE, pxe, na) \ > func(DHCP, dhcp, na) > > #define CONFIG_BOOTCOMMAND \ > "run findfdt; " \ > "run distro_bootcmd" > > I simply deleted the line 87 - that's what I assumed you meant by remove > "mmc 0". Do I need to blow away the legacy entry as well? > Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYhhnUcTMsuy0aVLYFBos3OqQb6yNOCZc_7OJUqYwMzqoA%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
