You obviously have not tried starterware..........dd On Friday, January 29, 2016 at 3:56:25 PM UTC+2, Karl Karpfen wrote: > > OK...but why inventing the wheel again? > <http://sourceforge.net/projects/starterwarefree/> > > Am Sonntag, 24. Januar 2016 13:01:06 UTC+1 schrieb dd: >> >> Hi all. I am bringing up a bare metal system on the beaglebone black and >> giving it away! So if you want to have some fun, while learning alot about >> this ARM core, get involved. The drivers are in Assembly (easy once you >> get the hang of it) with the main program in C. All the build files are >> there, so you won't waste months trying to compile/load/run the dang >> thing. I do not use an IDE, just use Notepad++ and GNUwin32 'make' from a >> DOS command line. >> Feel free to take whatever drivers you need for your project/hackjob: >> UART, I2C, MMC, IRQ, GPIO, PWM, RTC. >> So now you can build a FAST and ROBUST standalone control system. >> Stack/interrupt setup and the loadscript is handy. Getting an image up >> was a BITCH!. >> I am now working on ethernet. Then the beast will be live on the >> internet! >> >> Check it out at >> www.baremetal.tech and ww.github.com/ddlawrence >> >> I could sure use some help. It is fun, really! No more bugs! (except >> your own of course) >> >> hack on..............dd >> >>
-- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/8f79e8fe-913e-455c-8fe4-38fccba1b1b7%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
