Hi guys, I have difficulty controlling nRF24L01+ on BeagleBone Black using Python.
I use this library https://github.com/jpbarraca/pynrf24 Here is my code: http://pastie.org/10836500 Here is output of printDetails: STATUS = 0x0e RX_DR=0 TX_DS=0 MAX_RT=0 RX_P_NO=7 TX_FULL=0 RX_ADDR_P0-1 = 0xe7e7e7e7e7 0xc2c2c2c2c2 RX_ADDR_P2-5 = 0xc3 0xc4 0xc5 0xc6 TX_ADDR = 0xe7e7e7e7e7 RX_PW_P0-6 = 0x08 0x08 0x00 0x00 0x00 0x00 EN_AA = 0x3f EN_RXADDR = 0x02 RF_CH = 0x60 RF_SETUP = 0x06 SETUP_AW = 0x03 OBSERVE_TX = 0x00 CONFIG = 0x0c FIFO_STATUS = 0x11 DYNPD = 0x00 FEATURE = 0x00 Data Rate = 1MBPS Model = nRF24l01+ CRC Length = 16 bits PA Power = PA_MAX For the other side, we use Arduino. The problem is that: - BeagleBone side cannot send to Arduino side, with error MAX_RT - BeagleBone side can receive data from Arduino side, but now cannot receive. Do you have any notice for me to make it work? I connect nRF24L01+ to SPI0 port of BeagleBone, so it should not have conflict with HDMI. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/1de82e0d-0f91-46e7-857d-6ab11c4cbe6c%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
