I'm downloading the 4GB lxqt image and will give it a go on my A5A BBB and a recent BBG. I'll post any issues here. I'm particularly testing the "newbie" out of the box experience starting with the Start.HTM web page link to the bonescript examples, cloud9 IDE examples with some hardware "hello world" tests of digitalRead/Write() analogRead/Write() and attachInterrupt(). Finally onto node-red.
In the 2016-05-01 image it was really close to "great" only analogWrite() was an issue in cloud9/bonescript and node-red wouldn't load node-red-node-beaglebone supplemental nodes. If these two and config-pin all work without breaking anything else, I'd say this might be a good candidate for the "top level" beagleboard.org "latest Jessie". I don't use the HDMI only the web interface and ssh -X On Saturday, May 14, 2016 at 7:34:48 AM UTC-5, Jason Kridner wrote: > > Robert's made a ton of improvements over the last several weeks/months and > it makes some sense to try to update the promoted images. A GUI-less IoT > image is now being produced to > > These are using a 4.4 Linux kernel. > > LXQT-4GB for BeagleBone Black and compatibles: > > http://debian.beagleboard.org/images/bone-debian-8.4-lxqt-4gb-armhf-2016-05-13-4gb.img.xz > > > sha256sum: 28d67e877497fb9e52fe605f2cbefdbaedaff23e9fa82e9ed2076ae375aa777f > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/931dca81-83d0-4b12-825e-c6fcc49ef8ed%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
