Recently lost power and corrupted my sd card badly and had to start over. I have seen the battery "UPS" for BBB type but don't need another battery. I have a small APC UPS for the BBB, DSL modem, a VOIP box, and a router but the UPS does not have a comm port to report status to the BBB. Would like to set up so that when the AC power drops the BBB will shutdown in 5 minutes (most outages are shorter but this is still much before the UPS runs out of power). If the power is restored before that continue to run. When power is restored start up. With an additional wall wart power supply I could generate a logic level signal for when the AC line is ok (input to UPS). Does anything like this exist? If not, anything similar enough that I could hack up the scripts a bit and get there? Would rather not have to start from scratch.
-- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/ed9d6695-08ab-48b6-a3dc-8e645b8f4e4c%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
