Hi Robert,

I would think that the need for tethering would be the exception so I’m not 
sure why you would set this on by default.

Regards,
John




> On May 18, 2016, at 5:51 PM, Robert Nelson <[email protected]> wrote:
> 
> Hi Mike
> 
> On Wed, May 18, 2016 at 7:08 PM, Mike Erdahl <[email protected] 
> <mailto:[email protected]>> wrote:
> 
> Accidentally posted this on the beaglebone google group... annoying.
> 
> connman works just fine for my three different RTL81xx based USB WIFI 
> adapters on the Debian Jessie 8.3 bb.org <http://bb.org/> release, but wifi 
> seems dead on the Debian Jessie 8.4 bb.org <http://bb.org/> release (wifi 
> scan either hangs, or does not find anything).  Same behavior on BeagleBone 
> Black and Green, powered with external bricks.
> 
> I run on both 8.3 and 8.4:
> 
> $ sudo su
> # connmanctl
> connmanctl> enable wifi
> connmanctl> scan wifi
> connmanctl> services
> 
> At this point, I either see my AP (Jessie 8.3), or nothing (Jessie 8.4)
> 
> Checking 'technologies' on both releases does show WiFi is present, and 
> powered.
> 
> Is there any config magic required before using connman with Debian 8.4 
> bb.org <http://bb.org/> release?  Unfortunately I overwrote my SD card before 
> capturing the kernel log, but it seemed like the rtl firmware was loading 
> fine, with no errors being reported.
> 
> We have tether'ing enabled out of the box, so you need to disable that:
> 
> $ sudo su
> # connmanctl
> connmanctl> tether wifi off
> connmanctl> enable wifi
> connmanctl> scan wifi
> connmanctl> services
> 
> then it'll work just fine. ;)
> 
> Regards,
> 
> -- 
> Robert Nelson
> https://rcn-ee.com/ <https://rcn-ee.com/>
> 
> -- 
> For more options, visit http://beagleboard.org/discuss 
> <http://beagleboard.org/discuss>
> --- 
> You received this message because you are subscribed to the Google Groups 
> "BeagleBoard" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to [email protected] 
> <mailto:[email protected]>.
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/beagleboard/CAOCHtYgfNVZ67hGbBurH19Y41kvmwXtsizx8R74Fg44iVDJoSg%40mail.gmail.com
>  
> <https://groups.google.com/d/msgid/beagleboard/CAOCHtYgfNVZ67hGbBurH19Y41kvmwXtsizx8R74Fg44iVDJoSg%40mail.gmail.com?utm_medium=email&utm_source=footer>.
> For more options, visit https://groups.google.com/d/optout 
> <https://groups.google.com/d/optout>.

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/CC8F84F9-71CF-42C2-8232-97B113571FDD%40gmail.com.
For more options, visit https://groups.google.com/d/optout.

Reply via email to