I'll try to get it added to my tree today, http://development.thecongers.org/home/bbbandroid-bluez
On Fri, May 20, 2016 at 4:48 AM, <[email protected]> wrote: > Hi Keith > > Is it possible to give me more details on how to apply this patch? I went > to their website and found the build process easy to perform. > > On Friday, May 20, 2016 at 6:22:21 AM UTC+3, Keith Conger wrote: >> >> The issue is the kernel in bbbandroid doesn't have the bbgreen device >> tree patches. I was able to apply the patchs to kernel and run on the >> green with a LCD. >> >> Keith >> >> On Thursday, May 19, 2016 at 5:56:48 PM UTC-6, [email protected] wrote: >>> >>> >>> Hello all, >>> >>> >>> I downloaded the android image from here >>> <http://bbbandroid.sourceforge.net/> and I followed the usual >>> instructions using Win32DiskImager. I inserted the 16GB SD card to the >>> beaglebone and while holding down the S2 button that is next to the SD card >>> slot I applied power using an external power supply. I kept the button >>> pressed for few seconds after power is on. >>> >>> >>> Booting the on-board eMMC image will work fine, the beaglebone appears >>> on my network with SSH port available. With this android image the board >>> won't show up on the network; Port scanning sees the device but no open >>> ports available, also ping sometimes gives me Time out or unreachable. I'm >>> not sure if it even booted or not. The user LEDs are flashing probably >>> according to there usual pattern. >>> >>> >>> I tried this <http://elinux.org/Beagleboard:Android> article but I get >>> the same effect. As far as I know, the BB green and black are the same >>> exact hardware which means the same should work on both, that's what BB >>> website <https://beagleboard.org/latest-images> is providing. >>> >>> >>> What am I missing here? Thank you in advance. >>> >> -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to a topic in the > Google Groups "BeagleBoard" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/beagleboard/uNDXhFiOtRo/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/3f7f66b1-1c67-45cc-bde9-4fba3d904ae9%40googlegroups.com > <https://groups.google.com/d/msgid/beagleboard/3f7f66b1-1c67-45cc-bde9-4fba3d904ae9%40googlegroups.com?utm_medium=email&utm_source=footer> > . > > For more options, visit https://groups.google.com/d/optout. > -- Keith Conger keith DOT conger AT gmail DOT com http://thecongers.org -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CALUN%2BEfpor-mJj3D-iWL5RA49g_9qaN6QCYuh3%2BtjPVbX493mQ%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
