Ah, I just read serial adapter. For right angled JTAG, I made my own using a ARM20cTi20 Rev B adapter from Tincantools and then soldering a right angled 100mil female header to a straight 100 mil female header.
Regards, John > On May 23, 2016, at 3:48 PM, Rick Mann <[email protected]> wrote: > > >> On May 23, 2016, at 15:01 , John Syne <[email protected]> wrote: >> >> I just bent the serial pins to about 80 deg and it works fine with a cape >> attached. > > This is what I do. It's gross. Better would be to put a right-angle header on > the bottom. > > -- > Rick Mann > [email protected] > > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/A99C1CF5-667B-4E4E-B37E-EED600720569%40latencyzero.com. > For more options, visit https://groups.google.com/d/optout. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/4CE6FB60-FE62-4EAA-BD32-2C88E5982C69%40gmail.com. For more options, visit https://groups.google.com/d/optout.
