I modified the app a bit and tried running this code on the BBB under
sudo mode :
gpio_export(gpio);
// gpio_set_dir(gpio, 0);
gpio_set_dir(gpio, 1);
gpio_set_edge(gpio, "rising");
gpio_fd = gpio_fd_open(gpio);
printf("debug_1 \n");
gpio_set_value(gpio,1);
sleep(1000);
gpio_set_value(gpio,0);
printf("debug_2 \n");
but I see App stuck @debug_1 and getting this error :
*gpio-49(sysfs):_gpiod_direction_output_raw:tried to set a GPIO tied to an
IRQ as output.*
I even tried this :
gpio_set_dir(gpio, 0);
// gpio_set_dir(gpio, 1);
in this I don't get the error but again the App hangs at the same point.
What I am doign wrong here?My intent is to Set -reset the GPIO1_17 ( that
is p9 header pin P9_23) that is GPIO 17 of 32 (0–31) on the second GPIO
chip of four (0–3).
Am I choosing the wrong GPIO.?
On Monday, June 13, 2016 at 9:41:34 AM UTC+5:30, Raul Piper wrote:
>
> CEB,
> On which platform you tested this?Did you get any issue?Set/Reset of any
> GPIO works fine on any kernel?4.x+?
> Rp
>
> On Friday, June 14, 2013 at 2:01:51 AM UTC+5:30, CEB wrote:
>>
>> Take a look at
>> https://developer.ridgerun.com/wiki/index.php/Gpio-int-test.c
>>
>> Worked for me.
>>
>> CEB
>>
>> On Wednesday, June 12, 2013 12:46:04 AM UTC-4, MH wrote:
>>>
>>> Just want to start a discussion. Who all is working or maybe even found
>>> a means of controlling the GPIO in C for Beaglebone Black? I have been
>>> hunting for a while and haven't found anything reliable.
>>>
>>
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/beagleboard/c6abe7ba-c08d-42de-8d9a-685a24a4a810%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
