BeagleBone Black under Linux, runs at 400KHz. Gerald
On Tue, Jun 14, 2016 at 7:41 AM, Karl Karpfen <[email protected]> wrote: > Hi, > > according to the TRM of AM335x the I2C bus frequency can be 100 kHz or 400 > kHz. But when I have a look into the StarterWare I2C examples, only 100 kHz > are used (for EEPROM and PMIC). > > Is there a special reason for this? Or is it just a limitation of the > example sources and BBB hardware in general can run with 400 kHz? > > Thanks! > > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/ac29f2e1-42f1-4b53-86cf-69c73643c804%40googlegroups.com > <https://groups.google.com/d/msgid/beagleboard/ac29f2e1-42f1-4b53-86cf-69c73643c804%40googlegroups.com?utm_medium=email&utm_source=footer> > . > For more options, visit https://groups.google.com/d/optout. > -- Gerald [email protected] http://beagleboard.org/ [email protected] -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAHK_S%2BdMQueSAAqryvA924v%2BxhY44v7HJ%3DPG8%2B-fa0oMJ7KqhA%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
