Unless you take the time to register, your posts are moderated. It is part of a complicated SPAM prevention process. Register and and after your first post it will go through without moderation.
Gerald On Fri, Jun 17, 2016 at 4:45 AM, <[email protected]> wrote: > Hello BBB-hackers! > > My first attempt to post here sees to have failed. If this is a double > post, a moderator can remove this or my previous > > post > > Im trying to understand how the boot process works and how to flash an > am335x-based design. This raises some questions: > > Reading around I get the impression that the SPL-file named "MLO" should > be stored at mmcblk0p1. I cant find it there (or > > the big/regular uboot img either). Where should I look? My BBB boots fine, > so it has to be somewhere. > > When monitoring UART0 at boot, the SPL says "bad magic". But it still > boots. Still an untouched BBB. Any good reason for > > this? > > I have installed uniflash in an atempt to understand how to boot from USB0 > as a part of flashing a fresh am335x-design. The > > BBB enumenrates as expected when powered with S2 pressed (and has proper > static IP's assigned to all instances of the RNDIS > > driver), but there is no noise in the uniflash (the UART0 sometimes shows > "CCCCCCCC"). Any ideas? I have tried openboot > > aswell, and it does not seem to lease any IP to the BBB > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/09d02c62-16ed-48c0-b57a-8b404fb665f5%40googlegroups.com > <https://groups.google.com/d/msgid/beagleboard/09d02c62-16ed-48c0-b57a-8b404fb665f5%40googlegroups.com?utm_medium=email&utm_source=footer> > . > For more options, visit https://groups.google.com/d/optout. > -- Gerald [email protected] http://beagleboard.org/ [email protected] -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAHK_S%2BdOBss66Vtf%2BxOJX0XOj8NcaytmrfoNxO%2BMFPnDY3UiaQ%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
