It is in the System Reference Manual. http://www.elinux.org/Beagleboard:BeagleBone
Gerald On Thu, Jun 30, 2016 at 12:40 PM, Walter King <[email protected]> wrote: > Hello all! > > I need to create a mounting plate for an original BeagleBone (the white > one that has been discontinued). However, I cannot find mechanical drawings > for it anywhere and will not have access to the board until after the mount > has been fabricated. Does anyone know what the diameter of the mounting > holes are and the distances between them? Is it the same as on the > BeagleBone Blacks? Thank you in Advance!! > > Walter > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/96c4648c-18c1-4779-8f2d-7634c28033a6%40googlegroups.com > <https://groups.google.com/d/msgid/beagleboard/96c4648c-18c1-4779-8f2d-7634c28033a6%40googlegroups.com?utm_medium=email&utm_source=footer> > . > For more options, visit https://groups.google.com/d/optout. > -- Gerald [email protected] http://beagleboard.org/ [email protected] -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAHK_S%2Bfzb2GoPAuG2zUvOyOQNuxcpw86wqrLM0AB_yvAzReZOQ%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
