The "USB Gadget" Ethernet address should be 192.168.7.2 on. If your host OS won't mount the SD card, might be difficult (impossible) to install the drivers that your OS might need for the gadget interface. Check the beagleboard.org site to try and find a link to downloading the drivers separately.
On Saturday, July 9, 2016 at 1:53:43 PM UTC-5, Fabricio Henrique wrote: > > I'm starting with beaglebone now and i'm stacked into a problem with it. > When i connect my board to PC with USB cable it reconized but i can't > access the SD card and the http://192.168.0.7 isn't working too. > > The Led of RJ-45 is OK and there's a led that is blinking too. > > Thanks for answers and sorry for the poor english i'm not a native > speaker. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/e7f355ee-42db-44be-802b-e5281b455277%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
