I have seen this too. Free air - some boards running at 40-45 some at 55-60*C. I suspect that it is a configuration issue, however, I have not been able to prove this. Not the same code in each instance - and I'm not very strong on the SW side of things so can't tell what the differences are. I plan on spending more time on this in the near future - will let you know if I find something. Hopefully, you may be able to narrow it down some too.
GL, Matt On Monday, July 11, 2016 at 9:24:50 AM UTC-5, Gerald wrote: > > Environment is important, but if there is no venting in the box, then the > heat can stay in the box and it can build up. Not a good condition if it > can be avoided. The BBB is not industrial rated. > > 56 is a little warm as well. But that depends on what you are using it for > and how much time is spent running full speed. The heat comes out the > bottom of the board, so just laying in on a table is like putting it in a > box. > > Gerald > > On Mon, Jul 11, 2016 at 9:20 AM, Fohnbit <[email protected] <javascript:>> > wrote: > >> Hello Gerald, >> >> it is in a closed Din Rail housing and in a electrical distributor box. >> In the Box, the enviroment are 31.5°C ... so not sooo high. >> >> But also the Beaglebone on my desk, complete open, has 56°C >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected] <javascript:>. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/beagleboard/3bbb4d11-6577-4c3c-9b20-577487665fbc%40googlegroups.com >> >> <https://groups.google.com/d/msgid/beagleboard/3bbb4d11-6577-4c3c-9b20-577487665fbc%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> >> For more options, visit https://groups.google.com/d/optout. >> > > > > -- > Gerald > > [email protected] <javascript:> > http://beagleboard.org/ > [email protected] <javascript:> > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/52e8016e-ad8e-44ad-b2eb-9a5976f57303%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
