>> I connected the board to the pc, by the serial cable to usb, using the terminal emulator with command: sudo putty /dev/ttyUSB0. (but i do not know if because the cable not is crossed or the port disabled)
You should hookup the debug port with a cross over serial cable and let us know. >> When it energized by the DC connector to 5V / 1A Also, you should use a 5V/ 3A power supply. I have had problems with the BB not booting because of the power supply source. TP -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAGNmLEOeg2mQuFQuObH1S%2BYnYJk9MXqw0bGDowrSshDGeHoD%3Dg%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
