I found some of the following links helpful: <goog_1601012105> https://groups.google.com/forum/#!searchin/beagleboard/nfs-uEnv|sort:date/beagleboard/X5jSWpPXegY/JxjNKU22A6kJ https://groups.google.com/forum/#!searchin/beagleboard/[FAILED]$20Failed$20to$20start$20Login$20Service.|sort:date/beagleboard/iQVDxV9wb6A/-AgFwZcvAQAJ
James On Wednesday, July 13, 2016 at 2:49:13 PM UTC+1, Ratan wrote: > > > Hi , > > I am newbie and trying to compile kernel and using TFTP want to boot my > beaglebone black . > > My problem is , my board gets hanged up at "starting Kernel " > > > Log is as below . Thank you for any help . > > > U-Boot# setenv ipaddr 192.168.1.7 > U-Boot# setenv serverip 192.168.1.5 > U-Boot# tftpboot 0x80F80000 am335x-boneblack.dtb > link up on port 0, speed 100, full duplex > Using cpsw device > TFTP from server 192.168.1.5; our IP address is 192.168.1.7 > Filename 'am335x-boneblack.dtb'. > Load address: 0x80f80000 > Loading: T #### > 9.8 KiB/s > done > Bytes transferred = 58133 (e315 hex) > U-Boot# tftpboot 0x80007fc0 uImage-BBB > link up on port 0, speed 100, full duplex > Using cpsw device > TFTP from server 192.168.1.5; our IP address is 192.168.1.7 > Filename 'uImage-BBB'. > Load address: 0x80007fc0 > Loading: T > TFTP error: 'File not found' (1) > Not retrying... > U-Boot# tftpboot 0x80007FC0 uImage-BBB > link up on port 0, speed 100, full duplex > Using cpsw device > TFTP from server 192.168.1.5; our IP address is 192.168.1.7 > Filename 'uImage-BBB'. > Load address: 0x80007fc0 > Loading: T > ################################################################# > ################################################################# > ################################################################# > ################################################################# > ################################################################# > ################################################################# > ################################################################# > ################################################################# > ############# > 307.6 KiB/s > done > Bytes transferred = 7810336 (772d20 hex) > U-Boot# setenv bootags console=ttyO0,115200n8 root=/dev/mmcblk0p2 ro > rootfstype=ext4 rootwait > U-Boot# bootm 0x80007fc0 - 0x80f80000 > ## Booting kernel from Legacy Image at 80007fc0 ... > Image Name: Linux-4.1.24+ > Image Type: ARM Linux Kernel Image (uncompressed) > Data Size: 7810272 Bytes = 7.4 MiB > Load Address: 80008000 > Entry Point: 80008000 > Verifying Checksum ... OK > ## Flattened Device Tree blob at 80f80000 > Booting using the fdt blob at 0x80f80000 > XIP Kernel Image ... OK > OK > Using Device Tree in place at 80f80000, end 80f91314 > > Starting kernel ... > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/e3a13ba6-a148-48ff-bca6-e92c014a0aee%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.