Make sure all flow control is of. I've purchased some cables where TX and RX are reversed, check that well
On 14 Jul 2016 12:14, "Sangyong Lee" <[email protected]> wrote: > Thank you for reply. > > I was tried connect to debug mode used serial cable. > > but, is not connect. It has been shown a lot of broken character on the > screen. > (setting = Baud 115,200 / Bits 8 / Parity N / Stop Bits 1 / Handshake > None ) > > I will browse the another method. > > > > 2016년 7월 13일 수요일 오전 10시 4분 37초 UTC+9, Graham 님의 말: >> >> See: >> >> >> http://elinux.org/Beagleboard:BeagleBone_Black_Accessories#Serial_Debug_Cables >> >> The serial cable plugs directly into the Beaglebone, and is used to debug >> problems with the unit. >> >> --- Graham >> >> == >> >> On Tuesday, July 12, 2016 at 7:20:16 PM UTC-5, Sangyong Lee wrote: >>> >>> I can not connect to the console. >>> >>> LED is operated, but BBB is does not connect. >>> >>> >>> >>> 2016년 7월 12일 화요일 오후 5시 41분 26초 UTC+9, Jason Kridner 님의 말: >>>> >>>> Can you connect a serial cable and capture the console logs? >>>> >>>> On Tue, Jul 12, 2016 at 3:04 AM Sangyong Lee <[email protected]> >>>> wrote: >>>> >>>>> Hello, >>>>> >>>>> I'm used the install Ubuntu 13.10 OS on the two Beaglebone Black. >>>>> (Testing the small web server) >>>>> >>>>> However, when the reboot will not boot. ( Input the "shutdown -r now" >>>>> command after connected the ssh. ) >>>>> >>>>> One device is a all LED is on always, not boot and connect. (Rev A5C) >>>>> >>>>> The other device is a first LED is Blink always, but not boot and >>>>> connect. (Rev B) >>>>> >>>>> Apache, php, mysql other than software has not installed. >>>>> >>>>> Please advice about how to solve this problem. >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> -- >>>>> For more options, visit http://beagleboard.org/discuss >>>>> --- >>>>> You received this message because you are subscribed to the Google >>>>> Groups "BeagleBoard" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>> an email to [email protected]. >>>>> To view this discussion on the web visit >>>>> https://groups.google.com/d/msgid/beagleboard/26e3f446-4781-4841-887f-6839d241097c%40googlegroups.com >>>>> <https://groups.google.com/d/msgid/beagleboard/26e3f446-4781-4841-887f-6839d241097c%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>> . >>>>> For more options, visit https://groups.google.com/d/optout. >>>>> >>>> -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/5d3e1060-586e-440b-aa62-c887872dfcc2%40googlegroups.com > <https://groups.google.com/d/msgid/beagleboard/5d3e1060-586e-440b-aa62-c887872dfcc2%40googlegroups.com?utm_medium=email&utm_source=footer> > . > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAG73kvXaBm7pKZiiHW9OHreVbvHa0B8hJD1VMNcs9jc%2BXMSruw%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
