You still have to follow Roberts instructions I provided you earlier in this thread. Robert didn’t use overlays because Remoteproc had an issue, so if you want to use uio_pruss, you still have to use the same instructions. This applies to the 4.4-ti kernel.
Regards, John > On Jul 15, 2016, at 10:06 AM, Joseph Heller <[email protected]> > wrote: > > Did not get uio driver up and running yet, is this still an issue on the 4.4 > kernel? I did not see a confirmation reading this > <https://groups.google.com/forum/#!category-topic/beagleboard/3iJ-J-x0-Ko> > post either. Tried both loading via device tree (uio_pruss_enable) or plain > insmod uio_pruss. > > I wonder if using a 4.1 kernel a safer bet in that respect? > > On Wednesday, July 13, 2016 at 10:19:11 PM UTC+2, William Hermans wrote: > By the way, TI's most recent kernels are purportedly supposed to use either > remoteproc, or uio_pruss. I say purportedly because I have not personally > experimented with that yet, but Robert made a post not long ago about this. > So it sounds like right off the bat, all you need to do is load the PRU > overlay file to get uio_pruss working. Or a slightly more involved process to > get remoteproc working. > > -- > For more options, visit http://beagleboard.org/discuss > <http://beagleboard.org/discuss> > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected] > <mailto:[email protected]>. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/a8f3c97d-28f9-4e0f-8c5f-fb5dbd1503cc%40googlegroups.com > > <https://groups.google.com/d/msgid/beagleboard/a8f3c97d-28f9-4e0f-8c5f-fb5dbd1503cc%40googlegroups.com?utm_medium=email&utm_source=footer>. > For more options, visit https://groups.google.com/d/optout > <https://groups.google.com/d/optout>. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/52733959-66C2-447A-B028-5B14E0AC42D8%40gmail.com. For more options, visit https://groups.google.com/d/optout.
