first of all thank you for your reply.. If you could suggest me though something more specific (i.e what voltage should i test?) i would appreciate it.. Now, what i noticed has really driven me crazy... Since i have the bb RevA6, i checked in the system reference manual ( http://beagleboard.org/static/beaglebone/latest/Docs/Hardware/BONE_SRM.pdf) that *power can be supplied via a 2.1mm x 5.5mm center connector when connected to a positive power supply rated at 5VDC +/- .1V and 1A.* So i used a power adaptor with nominal voltage output 5V which though, as i found out later by using a volt meter, it actually provided 5.26V...and miraculously the beaglebone power led turned on and the board was working...If i am not mistaken i accidentally exceeded the voltage limits (not the current though) and it worked.. Now the question is.. *what is the actual functional power supply for the bb white?*
-- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/94c001ec-b7d4-475f-995c-9de363494a41%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
