My setup :
Ubuntu 14.04 LTS dual boot with windows 7. I connected usb power cable which is a 5 volt supply. I also connected a usb to uart serial cable, and was able to see this to be as ttyUSB0 in ubuntu few days back. After I did not see this ttyUSB0 only ttyACM0 (which I think is from usb power cable). I have one doubt what is overcurrent? I checked what power usb to uart cable is getting and it was 5 volts. I checked the voltage on serial header of beaglebone and it was 3.3 volts. How ever I am not connecting red cable on beaglebone black. I am unable to understand what exactly is the problem? Please respond anything related to it. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/11344b91-3025-4a6a-8b61-bd501cb911b0%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
